PartsTable
Technical Data Sheet
Download PDF

2913 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
Multibrackets · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2913: RESISTOR,FIXED,WIRE WOUND,INDUCT.

The all new M Motorized Wallmount 80 kg Black incorporates design with rounded edges and overall features giving a softer, professional feel that fits well in corporate and classroom environments. The height of the often large size LCD/ LED can easily be adjusted by one person via a remote control. Never has a perfect viewing angle to any audience been so easy to achieve.

No technical know how or previous usage is needed to control the M Motorized Wallmount. Just set it at the height needed - and go! The motor-driven height adjustment allow you to move the LCD/LED screen up or down to a suitable height for any presentation or digital signage situation.

The wide reach up or down makes it suitable for both a sitting or standing audience, making this product a perfect multifunctional solution for any need. Using high quality details and components this M Motorized Wallmount will be servicing you for a long time. Tested under rigorous conditions with weights well over the max This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-1897, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2913
NSN: 3110-00-156-1897
NIINs: 001561897, 003446258, 004016962, 004719674, 006463062, 006475754, 007219808, 008912417, 010732741, 011426464, 012315459, 012548947, 014133554, 015545444, 016147401
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
width4.000 INCHES NOMINAL IN
length8.000 INCHES NOMINAL IN
materialCELLULOSE AND COTTON AND GAUZE
body_width0.272 INCHES NOMINAL IN
body_height0.068 INCHES NOMINAL IN
body_length0.540 INCHES MAXIMUM IN
terminal_typeTAB W/WIRE LEAD
alignment_typeRIGID
inclosure_typeENCAPSULATED
overall_height3.218 INCHES MAXIMUM IN
surface_finishGROUND
terminal_width0.125 INCHES NOMINAL IN
NSN3110-00-156-1897
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2913 · Multibrackets ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 90.00 MILLIMETERS MAXIMUM MM
•
BORE SMALLEST DIAMETER: 65.00 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT20.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS MAXIMUM MM
BORE SMALLEST DIAMETER65.00 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL BALL
MATERIALSTEEL WASHER
SUBSTITUTES & CROSS-REFERENCES 9
2913JReference document
Same NSN cross-reference
Reference document — Secondary reference
1513FS10000Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM206Reference document
Same NSN cross-reference
Reference document — Secondary reference
72-6970-924Reference document
Same NSN cross-reference
Reference document — Secondary reference
1513Reference document
Same NSN cross-reference
Reference document — Secondary reference
1875-5 PIECE 30Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2913?
2913 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2913?
There are 9 known substitutes for 2913: 2913J, 1513FS10000, BM206 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2913?
2913 is cataloged in the U.S. Government catalog under NSN 3110-00-156-1897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2913