PartsTable
Technical Data Sheet
Download PDF

2910296 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2910296: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.164 INCHES MINIMUM AND 1.770 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.040 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN, aperture_width: 3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN, overall_length: 3.950 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN, aperture_length: 3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM IN, outside_edge_to_bolt_hole_center_distance_along_width: 0.780 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-269-0332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2910296
NSN: 5330-01-269-0332
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
hole_diameter0.164 INCHES MINIMUM AND 1.770 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.040 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN
aperture_width3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
overall_length3.950 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN
aperture_length3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM IN
bolt_hole_quantity8
outside_edge_to_bolt_hole_center_distance_along_width0.780 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.840 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_edge_to_inside_edge_smallest_distance_along_width0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
outside_edge_to_inside_edge_smallest_distance_along_length0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5330-01-269-0332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2910296 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH: 0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
APERTURE WIDTH: 3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
•
APERTURE LENGTH: 3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 8
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH: 0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
OVERALL LENGTH3.950 INCHES MINIMUM AND 3.990 INCHES MAXIMUM IN
OVERALL WIDTH4.040 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN
APERTURE WIDTH3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
APERTURE LENGTH3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM IN
BOLT HOLE QUANTITY8
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.840 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2910296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2910296?
2910296 is a GASKET.
What is the NSN for 2910296?
2910296 is cataloged in the U.S. Government catalog under NSN 5330-01-269-0332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2910296

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.