The Bracket,mounting, cataloged under National Stock Number 5340-00-786-0186, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Ambac International Corporation Div Ambac International. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-786-0186 |
| Primary Part Number | GU8812 |
| Item Name | Bracket,mounting |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Ambac International Corporation Div Ambac International |
| Status | ACTIVE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| GU8812 PRIMARY | Ambac International Corporation Div Ambac International (USA) |
| Reference | Meaning |
|---|---|
| 7383430 | 5/9 Secondary reference U S Army Tank Automotive Command Amsta-Im-Mm |
| 2910007860186 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
NSN 5340-00-786-0186 is a Bracket,mounting, manufactured by Ambac International Corporation Div Ambac International, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-786-0186 has 1 manufacturer part number on file: GU8812 (Ambac International Corporation Div Ambac International).
Key specifications for GU8812: Special Features: PLUNGER IS FSCM 19207 PART NUMBER7383430; ITEM IS 0.121 IN. MINIMUM,0.125 IN. MAXIMUM IN THICKNESS; PLUNGER IS 1.375 INCHES LONG AND IS 0.850 MINIMUM,0.860 MAXIMUM,INCHES WIDE; THERE IS A 0.620 INCH DIAMETER DRILL POINT0.359 INCHES FROM THE LONGITUDINAL AXIS,AND CENTERED ON THE VERTICAL AXIS; ANOTHER HOLE 0.302 INCHES MINIMUN,0.303 INCHES MAXIMUM IN WIDTH AND FROM THE CENTER OF THE HOLE TO ITS TOP A LENGTH OF 0.170 MINIMUM,0.180 MAXIMUM INCHES,AND FROM ITS CENTER TO ITS BOTTOMHAS A RADIUS OF 0.231 INCHES MINIMUM,0.241 INCHES MAXIMUM OCCUPING THE CENTER OF THIS GUIDE,PLUNGER IN; End Item Identification: 2910007860186. 0 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.