PartsTable
Technical Data Sheet
Download PDF

29086 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Freecom · MRO · MRO_GENERAL
PRODUCT OVERVIEW

29086: RESISTOR,VARIABLE,WIRE WOUND,NON.

Create data, image, audio and video CDs and DVDs – any time and anywhere. This multi-format DVDburner 20x DL is available with the “LightScribe” labelling technology for blank disks. This technology enables CD or DVD surfaces to be inscribed without the aid of ink, pens or stickers.

After copying the data, simply place the CD or DVD upside-down in the drive, in order to create your own label direct to the surface of the disk. - Double Layer / LightScribe - DVD+9: (DoubleLayer):8x DVD-R9: (DoubleLayer):8x DVD+RW: 20x8x16x (DVD+/DVD+RW/DVD-ROM) DVD-RW: 20x6x16x (DVD-/DVD-RW/DVD-ROM) DVD-RAM: 12x CD-RW: 48x24x48x (CD-R/CD-RW/CD-ROM) This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-6186, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 29086
NSN: 3110-00-100-6186
NIINs: 001006186, 006189707, 014268645
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53762 — SEAGRAVE CORP THE (USA)
SPECIFICATIONS
features_providedELECTROSTATIC SENSITIVE
end_item_identificationA-10 AIM 9 TEST STA.
criticality_code_justificationCBBL
part_name_assigned_by_controlling_agencyPWR CONTROL & INTERFACE BD NO.1
NSN3110-00-100-6186
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 29086 · Freecom ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR BALLS, GRADE 50
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
ROLLING ELEMENT DIAMETER0.5000 INCHES NOMINAL IN
STYLE DESIGNATORBALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR BALLS, GRADE 50
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
104922Reference document
Same NSN cross-reference
Reference document — Secondary reference
55133Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5590Reference document
Same NSN cross-reference
Reference document — Secondary reference
858271Reference document
Same NSN cross-reference
Reference document — Secondary reference
3241219Reference document
Same NSN cross-reference
Reference document — Secondary reference
BB1731Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 29086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29086?
29086 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Freecom. It is classified as a MRO (MRO_GENERAL).
What parts can replace 29086?
There are 8 known substitutes for 29086: 104922, 55133, 5590 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29086?
29086 is cataloged in the U.S. Government catalog under NSN 3110-00-100-6186. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29086