PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29059
29059 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include bore_diameter: 30.0 MILLIMETERS NOMINAL MM, overall_width: 9.0 MILLIMETERS NOMINAL MM, special_features: DOUBLE SEALED, SINGLE ROW, end_item_identification: 6115-01-591-1161, overall_outside_diameter: 47.0 MILLIMETERS NOMINAL MM, part_name_assigned_by_controlling_agency: BEARING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6331, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29059
NSN: 3110-00-112-6331
FSC: 3110
CAGE: 53762 — SEAGRAVE CORP THE (USA)
SPECIFICATIONS
bore_diameter30.0 MILLIMETERS NOMINAL MM
overall_width9.0 MILLIMETERS NOMINAL MM
special_featuresDOUBLE SEALED, SINGLE ROW
end_item_identification6115-01-591-1161
overall_outside_diameter47.0 MILLIMETERS NOMINAL MM
part_name_assigned_by_controlling_agencyBEARING
NSN3110-00-112-6331
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 29059 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCES FOR JOURNAL BEARINGS
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
BORE DIAMETER1.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
BT772BInterchangeable
interchangeable cross-reference
interchangeable
772BInterchangeable
interchangeable cross-reference
interchangeable
42880Interchangeable
interchangeable cross-reference
interchangeable
XLS5 1-4Interchangeable
interchangeable cross-reference
interchangeable
3232597Interchangeable
interchangeable cross-reference
interchangeable
596-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29059?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29059?
29059 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 29059?
There are 27 known substitutes for 29059: BT772B, 772B, 42880 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29059?
29059 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29059

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026