PartsTable
Technical Data Sheet
Download PDF

290569PC8 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

290569PC8: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.375 INCHES NOMINAL IN, thread_class: 2A A, hole_diameter: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-272-4800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
290569PC8
NSN: 5306-00-272-4800
FSC: 5306 — Bolts
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.375 INCHES NOMINAL IN
thread_class2A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length1.000 INCHES MINIMUM IN
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
width_between_flats0.750 INCHES NOMINAL IN
NSN5306-00-272-4800
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 290569PC8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
FEATURES PROVIDED: UNFINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.375 INCHES NOMINAL IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MINIMUM IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
NOMINAL THREAD DIAMETER0.500 INCHES IN
FEATURES PROVIDEDUNFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL IN
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 3
1XA82Reference document
Same NSN cross-reference
Reference document — Secondary reference
W1162Reference document
Same NSN cross-reference
Reference document — Secondary reference
E46063-81PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 290569PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 290569PC8?
290569PC8 is a BOLT,MACHINE.
What parts can replace 290569PC8?
There are 3 known substitutes for 290569PC8: 1XA82, W1162, E46063-81PC8. Substitute compatibility should be verified for your specific system.
What is the NSN for 290569PC8?
290569PC8 is cataloged in the U.S. Government catalog under NSN 5306-00-272-4800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 290569PC8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.