2904943-97: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.380 INCHES NOMINAL IN, outside_diameter: 0.650 INCHES NOMINAL IN, operating_pressure: 235.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS, burst_test_pressure: 800.0 POUNDS PER SQUARE INCH LBS, end_item_identification: AM-7491/SPY-1D(V) DDG91&UP,AMPLIFIER,RADIO FREQ;AEGIS SPY-1D(V) INTERNAL USE APL. N/A FOR COSAL.
This part is cataloged in the U.S. Government catalog under NSN 4720-01-487-2161, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| temp_rating | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| inside_diameter | 0.380 INCHES NOMINAL IN |
| outside_diameter | 0.650 INCHES NOMINAL IN |
| operating_pressure | 235.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| burst_test_pressure | 800.0 POUNDS PER SQUARE INCH LBS |
| end_item_identification | AM-7491/SPY-1D(V) DDG91&UP,AMPLIFIER,RADIO FREQ;AEGIS SPY-1D(V) INTERNAL USE APL. N/A FOR COSAL |
| inside_surface_condition | SMOOTH |
| cross-sectional_shape_style | ROUND |
| measuring_method_and_length | 94.750 INCHES MINIMUM OVERALL AND 95.250 INCHES MAXIMUM OVERALL IN |
| minimum_inside_bending_radius | 4.000 INCHES IN |
| criticality_code_justification | FEAT |
| part_name_assigned_by_controlling_agency | (DRAWING)HOSE ASSEMBLY, NON METALLIC-SILICONE RUBBER |
| NSN | 4720-01-487-2161 |
| MEASURING METHOD AND LENGTH | 94.750 INCHES MINIMUM OVERALL AND 95.250 INCHES MAXIMUM OVERALL IN |
| TEMP RATING | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES IN |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| OUTSIDE DIAMETER | 0.650 INCHES NOMINAL IN |
| OPERATING PRESSURE | 235.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL IN |
| INSIDE SURFACE CONDITION | SMOOTH |
| SPECIAL FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |