PartsTable
Technical Data Sheet
PartsTable / MRO / 2904
2904 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include maximum_overall_width: 2.570 INCHES IN, current_rating_in_amps: 2.0, maximum_overall_length: 4.750 INCHES IN, maximum_voltage_rating_in_volts: 5.0 DC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-144-4899, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2904
NSN: 5999-01-144-4899
FSC: 5999
CAGE: 28023 — ASTRODYNE INC (USA)
SPECIFICATIONS
maximum_overall_width2.570 INCHES IN
current_rating_in_amps2.0
maximum_overall_length4.750 INCHES IN
maximum_voltage_rating_in_volts5.0 DC
NSN5999-01-144-4899
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 2904 MFR RESISTOR,FIXED,WIRE WOUND,INDUCT
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.200 INCHES NOMINAL FIRST MOUNTING FACILITY IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171 FED STD SINGLE TREATMENT RESPONSE
•
MATERIAL: COPPER ALLOY
•
SURFACE TREATMENT: OXIDE
•
MOUNTING FACILITY TYPE AND QUANTITY: 1 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.813 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE
UNTHREADED MOUNTING HOLE DIAMETER0.200 INCHES NOMINAL FIRST MOUNTING FACILITY IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171 FED STD SINGLE TREATMENT RESPONSE
MATERIALCOPPER ALLOY
SURFACE TREATMENTOXIDE
MOUNTING FACILITY TYPE AND QUANTITY1 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.438 INCHES NOMINAL SECOND MOUNTING FACILITY IN
MOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
OVERALL HEIGHT0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2904Upgraded Successor
successor cross-reference
successor
N12311JInterchangeable
interchangeable cross-reference
interchangeable
101048HInterchangeable
interchangeable cross-reference
interchangeable
FFH111-1212Interchangeable
interchangeable cross-reference
interchangeable
FF-H-111Interchangeable
interchangeable cross-reference
interchangeable
W-F-408-1-2-L-1-03-SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 2904?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2904?
2904 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2904?
There are 20 known substitutes for 2904: 2904, N12311J, 101048H and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2904?
2904 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-144-4899. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2904

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026