PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 290275-000
290275-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, plate_width: 3.000 INCHES NOMINAL IN, plate_length: 3.125 INCHES NOMINAL IN, hole_diameter: 0.193 INCHES NOMINAL IN, inside_length: 3.875 INCHES NOMINAL IN, stock_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-1758, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
290275-000
NSN: 5340-00-514-1758
FSC: 5340
CAGE: 14100 — STROMBERG-CARLSON CORP A PLESSEY TELECOMMUNICATIONS CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
plate_width3.000 INCHES NOMINAL IN
plate_length3.125 INCHES NOMINAL IN
hole_diameter0.193 INCHES NOMINAL IN
inside_length3.875 INCHES NOMINAL IN
stock_diameter0.312 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance0.875 INCHES NOMINAL IN
style_designatorRECTANGULAR OPEN
mounting_plate_styleRAISED
NSN5340-00-514-1758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 290275-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE WIDTH: 3.000 INCHES NOMINAL IN
•
PLATE LENGTH: 3.125 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RAISED
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: RECTANGULAR OPEN
•
STOCK DIAMETER: 0.312 INCHES NOMINAL IN
•
INSIDE LENGTH: 3.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.193 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PLATE WIDTH3.000 INCHES NOMINAL IN
PLATE LENGTH3.125 INCHES NOMINAL IN
MOUNTING PLATE STYLERAISED
MATERIALSTEEL OVERALL
STYLE DESIGNATORRECTANGULAR OPEN
STOCK DIAMETER0.312 INCHES NOMINAL IN
INSIDE LENGTH3.875 INCHES NOMINAL IN
HOLE DIAMETER0.193 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
HANDLE CLEARANCE0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1214Upgraded Successor
successor cross-reference
successor
7540Upgraded Successor
successor cross-reference
successor
PR9TPUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 290275-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 290275-000?
290275-000 is a HANDLE,BAIL.
What parts can replace 290275-000?
There are 3 known substitutes for 290275-000: 1214, 7540, PR9TP. Substitute compatibility should be verified for your specific system.
Is 290275-000 still available?
290275-000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 290275-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026