PartsTable
Technical Data Sheet
Download PDF

290101 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

290101: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN, length: 1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN, material: STEEL COMP 1010 OVERALL, hole_diameter: 0.410 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), loop_opening_width: 0.100 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-282-0469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
290101
NSN: 5340-01-282-0469
FSC: 5340 — Hardware, Commercial
CAGE: 24234 — AUSTIN-WESTRAN LLC (USA)
SPECIFICATIONS
width0.490 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
length1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OVERALL
hole_diameter0.410 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
loop_opening_width0.100 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
material_thickness0.021 INCHES NOMINAL IN
loop/holding_dimension0.470 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
loop/holding_smaller_dimension0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-282-0469
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 290101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.470 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.021 INCHES NOMINAL IN
•
LOOP/HOLDING SMALLER DIMENSION: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
LOOP OPENING WIDTH: 0.100 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
WIDTH: 0.490 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.470 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
MATERIAL THICKNESS0.021 INCHES NOMINAL IN
LOOP/HOLDING SMALLER DIMENSION0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
LOOP OPENING WIDTH0.100 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
WIDTH0.490 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OVERALL
HOLE DIAMETER0.410 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 290101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 290101?
290101 is a CLIP,SPRING TENSION.
What is the NSN for 290101?
290101 is cataloged in the U.S. Government catalog under NSN 5340-01-282-0469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 290101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.