PartsTable
Technical Data Sheet
Download PDF

290-005-0404 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

290-005-0404: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.063 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.235 INCHES NOMINAL IN, thread_length: 0.250 INCHES MINIMUM IN, screw_material: PLASTIC POLYAMIDE NYLON. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-882-9017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
290-005-0404
NSN: 5305-00-882-9017
FSC: 5305 — Screws
CAGE: 95542 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.063 INCHES NOMINAL IN
thread_class2A A
head_diameter0.235 INCHES NOMINAL IN
thread_length0.250 INCHES MINIMUM IN
screw_materialPLASTIC POLYAMIDE NYLON
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-882-9017
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 290-005-0404 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.063 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.250 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: PLASTIC POLYAMIDE NYLON
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.063 INCHES NOMINAL IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.250 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALPLASTIC POLYAMIDE NYLON
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH40
SUBSTITUTES & CROSS-REFERENCES 1
197061-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 290-005-0404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 290-005-0404?
290-005-0404 is a SCREW,MACHINE.
What parts can replace 290-005-0404?
There is 1 known substitute for 290-005-0404: 197061-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 290-005-0404?
290-005-0404 is cataloged in the U.S. Government catalog under NSN 5305-00-882-9017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 290-005-0404

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.