PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29-223
29-223 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REACTOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, end_radius: 0.437 INCHES NOMINAL IN, fork_depth: 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, body_length: 0.280 INCHES MAXIMUM IN, shank_length: 0.870 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-395-2414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29-223
NSN: 5340-00-395-2414
FSC: 5340
CAGE: 99643 — EATON AEROSPACE LLC DBA EATON AEROSPACE JACKSON (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
end_radius0.437 INCHES NOMINAL IN
fork_depth0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
body_length0.280 INCHES MAXIMUM IN
shank_length0.870 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
document_typeENGINEERING DRAWING
hole_diameter0.375 INCHES NOMINAL IN
overall_width0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
thread_length0.650 INCHES NOMINAL ROD CONNECTION IN
turn_quantity40 SINGLE COMPONENT SINGLE WINDING
NSN5340-00-395-2414
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29-223 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK ARM THICKNESS: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FORK DEPTH: 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 630 OVERALL
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
SHANK SHOULDER LENGTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
TECHNICAL CHARACTERISTICS (FLIS)
FORK ARM THICKNESS0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FORK DEPTH0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIALSTEEL COMP 630 OVERALL
SPECIAL FEATURES2 PARALLEL SLOTS THROUGH FORK BOTTOM AND SHANK SHOULDER
OVERALL HEIGHT0.812 INCHES NOMINAL IN
SHANK DIAMETER0.312 INCHES NOMINAL IN
SHANK SHOULDER LENGTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
NOMINAL THREAD SIZE0.312 INCHES ROD CONNECTION IN
HOLE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
42087Interchangeable
interchangeable cross-reference
interchangeable
805992-1Interchangeable
interchangeable cross-reference
interchangeable
29223Interchangeable
interchangeable cross-reference
interchangeable
36-189-1-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29-223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29-223?
29-223 is a REACTOR.
What parts can replace 29-223?
There are 4 known substitutes for 29-223: 42087, 805992-1, 29223 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29-223?
29-223 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-395-2414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29-223

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026