PartsTable
Technical Data Sheet
PartsTable / MRO / 29-010
29-010 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include length: 0.656 INCHES NOMINAL IN, cut_type: DIAGONAL OVERALL, material: PLASTIC, duty_type: CONTINUOUS, body_style: CYLINDRICAL BUSHING MOUNTED, joint_type: SCARF-PERIPHERAL RETAINER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 29-010
NSN: 3110-00-108-7470
FSC: 3110
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
length0.656 INCHES NOMINAL IN
cut_typeDIAGONAL OVERALL
materialPLASTIC
duty_typeCONTINUOUS
body_styleCYLINDRICAL BUSHING MOUNTED
joint_typeSCARF-PERIPHERAL RETAINER
body_length0.781 INCHES NOMINAL IN
insert_size3/4X10
shaft_styleROUND, SLOTTED
shaft_length0.500 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.688 INCHES NOMINAL IN
NSN3110-00-108-7470
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 29-010 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
OVERALL OUTSIDE DIAMETER: 1.2500 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
BORE DIAMETER0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
AT10Interchangeable
interchangeable cross-reference
interchangeable
123018Interchangeable
interchangeable cross-reference
interchangeable
MS1481-1Interchangeable
interchangeable cross-reference
interchangeable
DMS 90114BInterchangeable
interchangeable cross-reference
interchangeable
29-010Interchangeable
interchangeable cross-reference
interchangeable
134677-0000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29-010?
29-010 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 29-010?
There are 20 known substitutes for 29-010: AT10, 123018, MS1481-1 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29-010?
29-010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29-010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026