PartsTable
Technical Data Sheet
Download PDF

29-00087 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

29-00087: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, joint_type: BUTT OVERALL, peripheral_diameter: 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, center_hole_diameter: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, cross-sectional_height: 0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-752-9686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29-00087
NSN: 5330-00-752-9686
FSC: 5330 — Packing and Gasket Materials
CAGE: 81412 — TREADWELL CORPORATION (DELAWARE) DBA TREADWELL CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
joint_typeBUTT OVERALL
peripheral_diameter0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
center_hole_diameter0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
cross-sectional_height0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
criticality_code_justificationZZZY
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-00-752-9686
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29-00087 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYPROPYLENE OVERALL
•
JOINT TYPE: BUTT OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.058 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
MATERIALPLASTIC POLYPROPYLENE OVERALL
JOINT TYPEBUTT OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 3
100306CPReference document
Same NSN cross-reference
Reference document — Secondary reference
29-00087CPReference document
Same NSN cross-reference
Reference document — Secondary reference
100306Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 29-00087?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29-00087?
29-00087 is a PACKING,PREFORMED.
What parts can replace 29-00087?
There are 3 known substitutes for 29-00087: 100306CP, 29-00087CP, 100306. Substitute compatibility should be verified for your specific system.
What is the NSN for 29-00087?
29-00087 is cataloged in the U.S. Government catalog under NSN 5330-00-752-9686. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29-00087

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.