PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2892169-1
2892169-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.400 INCHES NOMINAL IN, first_leg_length: 0.650 INCHES NOMINAL IN, second_leg_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-382-7515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2892169-1
NSN: 5340-01-382-7515
FSC: 5340
CAGE: 09975 — UNISYS CORPORATION DBA UNISYS CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.400 INCHES NOMINAL IN
first_leg_length0.650 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.250 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.750 INCHES NOMINAL IN
surface_treatmentPASSIVATE
mounting_hole_typePLAIN AND COUNTERSUNK
first_leg_thickness0.125 INCHES NOMINAL IN
NSN5340-01-382-7515
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2892169-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG STYLE: END RADIUS
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.562 INCHES NOMINAL IN
•
SECOND LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
FIRST LEG END RADIUS: 0.200 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG STYLE: SQUARE
•
MOUNTING HOLE TYPE: PLAIN AND COUNTERSUNK
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG STYLEEND RADIUS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.562 INCHES NOMINAL IN
SECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG END RADIUS0.200 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG STYLESQUARE
MOUNTING HOLE TYPEPLAIN AND COUNTERSUNK
SURFACE TREATMENTPASSIVATE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1554454Upgraded Successor
successor cross-reference
successor
6515NCM195025Upgraded Successor
successor cross-reference
successor
208.403Upgraded Successor
successor cross-reference
successor
009329868Interchangeable
interchangeable cross-reference
interchangeable
K23004Interchangeable
interchangeable cross-reference
interchangeable
103236Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2892169-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2892169-1?
2892169-1 is a BRACKET,ANGLE.
What parts can replace 2892169-1?
There are 10 known substitutes for 2892169-1: 1554454, 6515NCM195025, 208.403 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2892169-1?
2892169-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-382-7515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2892169-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026