PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 287MR32P1
287MR32P1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE BODY, thread_class: 2B, thread_length: 0.172 INCHES NOMINAL IN, thread_series: UNEF, overall_height: 0.219 INCHES NOMINAL IN, sealing_method: MECHANICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-503-0820, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
287MR32P1
NSN: 5340-00-503-0820
FSC: 5340
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE BODY
thread_class2B
thread_length0.172 INCHES NOMINAL IN
thread_seriesUNEF
overall_height0.219 INCHES NOMINAL IN
sealing_methodMECHANICAL
mounting_methodTHREAD
special_featuresSILICONE RUBBER MOLDED TO 3/8-32 NEF-2 BRASS NUT
style_designatorTHRU-HOLE
width_across_flats0.610 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
base_thread_locationINTERNAL
NSN5340-00-503-0820
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 287MR32P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
OPENING INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE BODY
•
THREAD CLASS: 2B
•
THREAD LENGTH: 0.172 INCHES NOMINAL IN
•
BASE THREAD LOCATION: INTERNAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.219 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.375 INCHES IN
OPENING INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALRUBBER SILICONE BODY
SPECIAL FEATURESSILICONE RUBBER MOLDED TO 3/8-32 NEF-2 BRASS NUT
THREAD CLASS2B
THREAD LENGTH0.172 INCHES NOMINAL IN
BASE THREAD LOCATIONINTERNAL
SEALING METHODMECHANICAL
STYLE DESIGNATORTHRU-HOLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
1491Upgraded Successor
successor cross-reference
successor
6530NCM162804Upgraded Successor
successor cross-reference
successor
1405790Upgraded Successor
successor cross-reference
successor
9030Interchangeable
interchangeable cross-reference
interchangeable
14525AInterchangeable
interchangeable cross-reference
interchangeable
GX1156Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 287MR32P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 287MR32P1?
287MR32P1 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 287MR32P1?
There are 25 known substitutes for 287MR32P1: 1491, 6530NCM162804, 1405790 and 22 more. Substitute compatibility should be verified for your specific system.
Is 287MR32P1 still available?
287MR32P1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 287MR32P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026