PartsTable
Technical Data Sheet
Download PDF

2870IN10C10 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2870IN10C10: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: HEADLESS (SETSCREW), point_style: CUP, thread_class: 3A A, thread_length: 0.625 INCHES MINIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-807-8771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2870IN10C10
NSN: 5305-00-807-8771
FSC: 5305 — Screws
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleCUP
thread_class3A A
thread_length0.625 INCHES MINIMUM IN
fastener_length0.625 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH OR STRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.312 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-00-807-8771
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2870IN10C10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES MINIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLECUP
LOCKING FEATUREPATCH OR STRIP THREADS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
5/8-11UNC-3AX5/ 8INLGReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2870IN10C10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2870IN10C10?
2870IN10C10 is a SETSCREW.
What parts can replace 2870IN10C10?
There is 1 known substitute for 2870IN10C10: 5/8-11UNC-3AX5/ 8INLG. Substitute compatibility should be verified for your specific system.
What is the NSN for 2870IN10C10?
2870IN10C10 is cataloged in the U.S. Government catalog under NSN 5305-00-807-8771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2870IN10C10