PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 287-1030P7
287-1030P7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, hardness_rating: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-3954, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
287-1030P7
NSN: 5330-00-292-3954
FSC: 5330
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.500 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
hardness_rating40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.125 INCHES NOMINAL IN
bolt_hole_quantity4
elongation_percentage300 MAXIMUM
outside_corner_radius0.128 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-292-3954
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 287-1030P7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.125 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.172 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.128 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.125 INCHES NOMINAL IN
OVERALL LENGTH1.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
MATERIALRUBBER SYNTHETIC OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.172 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.128 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.172 INCHES NOMINAL IN
ELONGATION PERCENTAGE300 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5340-00-081-3933Interchangeable
interchangeable cross-reference
interchangeable
A-A-1011Interchangeable
interchangeable cross-reference
interchangeable
C1024Interchangeable
interchangeable cross-reference
interchangeable
173-140Interchangeable
interchangeable cross-reference
interchangeable
2508241Interchangeable
interchangeable cross-reference
interchangeable
1668795-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 287-1030P7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 287-1030P7?
287-1030P7 is a GASKET.
What parts can replace 287-1030P7?
There are 12 known substitutes for 287-1030P7: 5340-00-081-3933, A-A-1011, C1024 and 9 more. Substitute compatibility should be verified for your specific system.
Is 287-1030P7 still available?
287-1030P7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 287-1030P7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026