PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 28696D
28696D ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, bore_diameter: 1.4420 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.7606 INCHES MINIMUM AND 0.7706 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: BORE RADIUS 0.031 IN. BY 45 DEG IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0776, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
28696D
NSN: 3110-00-117-0776
FSC: 3110
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
bore_diameter1.4420 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.7606 INCHES MINIMUM AND 0.7706 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresBORE RADIUS 0.031 IN. BY 45 DEG IN
style_designatorTAPERED ROLLERS, BANDED OD
overall_outside_diameter2.6250 INCHES MINIMUM AND 2.6300 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-117-0776
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 28696D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.6250 INCHES MINIMUM AND 2.6300 INCHES MAXIMUM IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.4420 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: TAPERED ROLLERS, BANDED OD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.6250 INCHES MINIMUM AND 2.6300 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
OVERALL HEIGHT0.7606 INCHES MINIMUM AND 0.7706 INCHES MAXIMUM IN
BORE DIAMETER1.4420 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESBORE RADIUS 0.031 IN. BY 45 DEG IN
STYLE DESIGNATORTAPERED ROLLERS, BANDED OD
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
1525Interchangeable
interchangeable cross-reference
interchangeable
3M1525-2Interchangeable
interchangeable cross-reference
interchangeable
1525-2Interchangeable
interchangeable cross-reference
interchangeable
C9611-6Interchangeable
interchangeable cross-reference
interchangeable
640162901Interchangeable
interchangeable cross-reference
interchangeable
62172RSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 28696D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 28696D?
28696D is a BEARING,ROLLER,THRUST.
What parts can replace 28696D?
There are 25 known substitutes for 28696D: 1525, 3M1525-2, 1525-2 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 28696D?
28696D is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 28696D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026