28685: PLUG,MACHINE THREAD.
HP supports both software-based and hardware-based RAID. For example, HP now implements software RAID in embedded SATA controllers in some of the ProLiant servers and RBSU is used to enable it. Software-based RAID It is possible to have a RAID configuration without an array controller.
This is known as software RAID. With software-based RAID, the array management functions are implemented by software executing in a host environment such as the operating system. Software RAID requires additional transfers across the I/O bus.
Although software RAID is not as versatile as hardware RAID, it offers a cost-effective, entry-level, fault-tolerant solution. The advantages of software-based RAID are: - The ability to span multiple host controllers (duplexing) - Lower cost Hardware-based RAID With hardware-based RAID, the array management functions are implemented by the hardware and firmware within a RAID controller. The RAID control This part is cataloged in the U.S.
Government catalog under NSN 5365-00-045-8860, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 FASTENER |
| head_style | FLAT CHAMFER |
| head_height | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| thread_class | 3A A |
| head_diameter | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| thread_length | 0.875 INCHES MINIMUM IN |
| fastener_length | 1.710 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| hardness_rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| locking_feature | PELLET THREADS |
| thread_direction | RIGHT-HAND |
| surface_treatment | PASSIVATE FASTENER |
| width_across_flats | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN |
| NSN | 5365-00-045-8860 |
| HEAD HEIGHT | 0.140 INCHES NOMINAL IN |
| CONNECTION STYLE | PLAIN |
| THREAD LENGTH | 0.380 INCHES NOMINAL EXTERNAL IN |
| STYLE DESIGNATOR | PLUG, MACHINE |
| OVERALL LENGTH | 0.520 INCHES NOMINAL IN |
| THREAD DIRECTION | RIGHT-HAND EXTERNAL |
| NOMINAL THREAD SIZE | 0.750 INCHES EXTERNAL IN |
| THREAD CLASS | 2A EXTERNAL A |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| THREAD SERIES DESIGNATOR | UNF EXTERNAL |