PartsTable
Technical Data Sheet
PartsTable / MRO / 2862-2
2862-2 ✓ Verified by PartsTable
Bissell · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Maximise your cleaning performance with the Carpet Brush Roll for the BISSELL HydroWave. Key specifications include material: STEEL OVERALL, lens_type: FLAT, RECTANGULAR SINGLE LIGHT FIRST POSITION HORIZONTAL, lens_color: GREEN SINGLE LIGHT FIRST POSITION HORIZONTAL, thread_class: 3A A, body_diameter: 1.250 INCHES NOMINAL IN, overall_width: 0.7656 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0567, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2862-2
NSN: 3110-00-100-0567
FSC: 3110
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
lens_typeFLAT, RECTANGULAR SINGLE LIGHT FIRST POSITION HORIZONTAL
lens_colorGREEN SINGLE LIGHT FIRST POSITION HORIZONTAL
thread_class3A A
body_diameter1.250 INCHES NOMINAL IN
lens_quantity1
overall_width0.7656 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
overall_height1.105 INCHES NOMINAL IN
screw_materialSTEEL
usage_locationLEFT
mounting_methodBRACKET(S) AND UNTHREADED HOLE(S)
NSN3110-00-100-0567
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2862-2 · Bissell ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 3.8437 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0312 INCHES NOMINAL IN
OVERALL WIDTH0.7656 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER3.8437 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
28622Interchangeable
interchangeable cross-reference
interchangeable
101792-93Interchangeable
interchangeable cross-reference
interchangeable
10018993Interchangeable
interchangeable cross-reference
interchangeable
70-26300 ITEM 15Interchangeable
interchangeable cross-reference
interchangeable
70-26300Interchangeable
interchangeable cross-reference
interchangeable
28622-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2862-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2862-2?
2862-2 is a CUP,TAPERED ROLLER BEARING manufactured by Bissell. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2862-2?
There are 9 known substitutes for 2862-2: 28622, 101792-93, 10018993 and 6 more. Substitute compatibility should be verified for your specific system.
Is 2862-2 still available?
2862-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2862-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026