PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2857-3-16
2857-3-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304, overall_width: 0.620 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, aperture_diameter: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, surface_treatment: PASSIVATE, material_document_and_classification: QQ-S-766,COND A FINISH 2B FED SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-9547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2857-3-16
NSN: 5330-00-599-9547
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 304
overall_width0.620 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
aperture_diameter0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
surface_treatmentPASSIVATE
material_document_and_classificationQQ-S-766,COND A FINISH 2B FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
NSN5330-00-599-9547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2857-3-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: E TYPE AND 2 CLASS
•
MATERIAL: ASBESTOS AND IRON ALLOY
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED AND SOLID
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.312 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAE TYPE AND 2 CLASS
MATERIALASBESTOS AND IRON ALLOY
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED AND SOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
606519Interchangeable
interchangeable cross-reference
interchangeable
19A400Interchangeable
interchangeable cross-reference
interchangeable
C1-10Interchangeable
interchangeable cross-reference
interchangeable
C1-1DInterchangeable
interchangeable cross-reference
interchangeable
MILP17303CLASS2TYPEESYMB0L1111Interchangeable
interchangeable cross-reference
interchangeable
86740PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2857-3-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2857-3-16?
2857-3-16 is a SPACER,PLATE.
What parts can replace 2857-3-16?
There are 22 known substitutes for 2857-3-16: 606519, 19A400, C1-10 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2857-3-16?
2857-3-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-9547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2857-3-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026