PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2852-2001-11-33
2852-2001-11-33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-529-8197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2852-2001-11-33
NSN: 5330-01-529-8197
FSC: 5330
CAGE: 1W506 — CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identificationVALVE, REGULATOR 0.25IPS
NSN5330-01-529-8197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2852-2001-11-33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
PERIPHERAL DIAMETER: 0.818 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
PERIPHERAL DIAMETER0.818 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
END ITEM IDENTIFICATIONVALVE, REGULATOR 0.25IPS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
M83248-1-114ESInterchangeable
interchangeable cross-reference
interchangeable
2-114-V884-75Interchangeable
interchangeable cross-reference
interchangeable
5330001661063Interchangeable
interchangeable cross-reference
interchangeable
2-114V747-75Interchangeable
interchangeable cross-reference
interchangeable
845-2180961PC16Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2852-2001-11-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2852-2001-11-33?
2852-2001-11-33 is a PACKING,PREFORMED.
What parts can replace 2852-2001-11-33?
There are 14 known substitutes for 2852-2001-11-33: M83248-1-114ES, 2-114-V884-75, 5330001661063 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2852-2001-11-33?
2852-2001-11-33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-529-8197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2852-2001-11-33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026