PartsTable
Technical Data Sheet
Download PDF

2852-2001-11-30 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2852-2001-11-30: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.285 INCHES NOMINAL IN, center_hole_diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-529-8195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2852-2001-11-30
NSN: 5330-01-529-8195
FSC: 5330 — Packing and Gasket Materials
CAGE: 1W506 — CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.285 INCHES NOMINAL IN
center_hole_diameter0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationVALVE, REGULATOR 0.25IPS
NSN5330-01-529-8195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2852-2001-11-30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 0.285 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER0.285 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONVALVE, REGULATOR 0.25IPS
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
2852-2001-11 ITEM 30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G547-0002-2852200111A-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83248/1-007Reference document
Same NSN cross-reference
Reference document — Secondary reference
2852200111A-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2852-2001-11-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2852-2001-11-30?
2852-2001-11-30 is a PACKING,PREFORMED.
What parts can replace 2852-2001-11-30?
There are 4 known substitutes for 2852-2001-11-30: 2852-2001-11 ITEM 30, G547-0002-2852200111A-30, M83248/1-007 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2852-2001-11-30?
2852-2001-11-30 is cataloged in the U.S. Government catalog under NSN 5330-01-529-8195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2852-2001-11-30