Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, peripheral_diameter: 0.379 INCHES NOMINAL IN, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-529-8198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2852-2001-11-12
NSN:5331-01-529-8198 FSC:5331 — O-RING CAGE:1W506 — CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY (USA)
SPECIFICATIONS
material
RUBBER FLUOROCARBON CLASS FPM
hardness_rating
75.0 SHORE DUROMETER A NOMINAL
peripheral_diameter
0.379 INCHES NOMINAL IN
center_hole_diameter
0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
cross-sectional_height
0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identification
VALVE, REGULATOR, 0.25IPS
part_name_assigned_by_controlling_agency
VALVE, PRESSURE REGULATOR, AIR SYSTEM 1/4 IPS (DRAWING NAME)
NSN
5331-01-529-8198
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.379 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
RUBBER FLUOROCARBON CLASS FPM
CROSS-SECTIONAL HEIGHT
0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
PERIPHERAL DIAMETER
0.379 INCHES NOMINAL IN
END ITEM IDENTIFICATION
VALVE, REGULATOR, 0.25IPS
CENTER HOLE DIAMETER
0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
VALVE, PRESSURE REGULATOR, AIR SYSTEM 1/4 IPS (DRAWING NAME)
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2852-2001-11-12?
2852-2001-11-12 is a O-RING.
What parts can replace 2852-2001-11-12?
There are 17 known substitutes for 2852-2001-11-12: M83248/1-010, DF298851 FIND 7, 20346-400 FIND and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2852-2001-11-12?
2852-2001-11-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-529-8198. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.