The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_length: 1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN, second_leg_style: SQUARE, second_leg_width: 0.750 INCHES NOMINAL IN, style_designator: OFFSET DOUBLE ANGLE, second_leg_length: 2.770 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-230-4633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2850754-1
NSN:5340-01-230-4633 FSC:5340 — Hardware, Commercial CAGE:52088 — LOCKHEED MARTIN CORPORATION DIV RMS - MANASSAS (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_length
1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
0.750 INCHES NOMINAL IN
special_features
FIRST LEG HAS 0.201 IN. MIN 0.212 IN MAX DIA HOLE SPACED 0.950 IN. FROM END; CENTRAL RISER HAS 0.875 IN. DIA HOLE AND FOUR 0.126 IN. MIN 0.133 IN. MAX DIA HOLES IN
style_designator
OFFSET DOUBLE ANGLE
second_leg_length
2.770 INCHES NOMINAL IN
surface_treatment
CHROMATE
mounting_hole_type
PLAIN
first_leg_thickness
0.094 INCHES NOMINAL IN
second_leg_thickness
0.094 INCHES NOMINAL IN
center_section_height
1.470 INCHES NOMINAL IN
NSN
5340-01-230-4633
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.760 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.620 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
CENTER SECTION THICKNESS: 0.094 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
1.760 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.620 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
CENTER SECTION THICKNESS
0.094 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A
SECOND LEG WIDTH
0.750 INCHES NOMINAL IN
SECOND LEG LENGTH
2.770 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2850754-1?
2850754-1 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 2850754-1?
2850754-1 is cataloged in the U.S. Government catalog under NSN 5340-01-230-4633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.