PartsTable
Technical Data Sheet
Download PDF

2844132 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2844132: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN, first_hole_diameter: 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN, pin_overall_diameter: 0.1875 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-248-2261, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2844132
NSN: 5315-01-248-2261
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN
first_hole_diameter0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
pin_overall_diameter0.1875 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
second_hole_diameter0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
second_end_taper_angle45.0 DEGREES NOMINAL
second_end_taper_length0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
NSN5315-01-248-2261
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2844132 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 TYPE 4 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
SECOND END TAPER LENGTH: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 TYPE 4 MIL STD SINGLE TREATMENT RESPONSE OVERALL
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SECOND END TAPER LENGTH0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1875 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315PL0973851Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2844132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2844132?
2844132 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 2844132?
There is 1 known substitute for 2844132: 5315PL0973851. Substitute compatibility should be verified for your specific system.
What is the NSN for 2844132?
2844132 is cataloged in the U.S. Government catalog under NSN 5315-01-248-2261. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2844132

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.