PartsTable
Technical Data Sheet
Download PDF

2841317 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2841317: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3754 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN, overall_width: 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, CLOSED END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-480-4737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2841317
NSN: 3110-00-480-4737
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3754 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN
overall_width0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, CLOSED END, DRAWN SHELL
overall_outside_diameter0.5578 INCHES MINIMUM AND 0.5580 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-480-4737
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2841317 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, CLOSED END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.5578 INCHES MINIMUM AND 0.5580 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.3754 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, CLOSED END, DRAWN SHELL
OVERALL WIDTH0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.5578 INCHES MINIMUM AND 0.5580 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER0.3754 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
GM661Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 2841317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2841317?
2841317 is a BEARING,ROLLER,NEEDLE.
What parts can replace 2841317?
There is 1 known substitute for 2841317: GM661. Substitute compatibility should be verified for your specific system.
What is the NSN for 2841317?
2841317 is cataloged in the U.S. Government catalog under NSN 3110-00-480-4737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2841317