PartsTable
Technical Data Sheet
PartsTable / MRO / 28410
28410 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include height: 4.0 INCHES IN, material: RUBBER BODY, body_style: WEBBED, OFFSET, WITH LIGHTENING HOLES, body_width: 0.750 INCHES NOMINAL IN, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-107-1609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 28410
NSN: 5305-00-107-1609
FSC: 5305
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
height4.0 INCHES IN
materialRUBBER BODY
body_styleWEBBED, OFFSET, WITH LIGHTENING HOLES
body_width0.750 INCHES NOMINAL IN
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
body_height0.062 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
overall_width4.0 FEET FT
terminal_typeWIRE LEAD
inclosure_typeENCASED
NSN5305-00-107-1609
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 28410 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD
TECHNICAL CHARACTERISTICS (FLIS)
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
28410Interchangeable
interchangeable cross-reference
interchangeable
R060028410Interchangeable
interchangeable cross-reference
interchangeable
10292999Interchangeable
interchangeable cross-reference
interchangeable
509-014Interchangeable
interchangeable cross-reference
interchangeable
57112R2Interchangeable
interchangeable cross-reference
interchangeable
29001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 28410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 28410?
28410 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 28410?
There are 8 known substitutes for 28410: 28410, R060028410, 10292999 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 28410?
28410 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-107-1609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 28410

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026