2835870: WAVEGUIDE ASSEMBLY.
The WAVEGUIDE ASSEMBLY is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY ALL FLANGE, flexibility: RIGID SINGLE TUBING SEGMENT, flange_depth: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM FIRST FLANGE IN, flange_style: COVER TYPE SECOND FLANGE, thread_class: 2B FIRST FLANGE SINGLE CONNECTION FACILITY, special_features: TUBING WALL CONSTRUCTION CAN ALSO BE LAMINATED. This part is cataloged in the U.S.
Government catalog under NSN 5985-00-565-2477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY ALL FLANGE |
| flexibility | RIGID SINGLE TUBING SEGMENT |
| flange_depth | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM FIRST FLANGE IN |
| flange_style | COVER TYPE SECOND FLANGE |
| thread_class | 2B FIRST FLANGE SINGLE CONNECTION FACILITY |
| flange_quantity | 2 |
| special_features | TUBING WALL CONSTRUCTION CAN ALSO BE LAMINATED |
| thread_direction | RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY |
| bend_angle_in_deg | 90.0 THIRD BEND H-PLANE |
| surface_treatment | OXIDE FILM ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| operating_pressure | 20.0 POUNDS PER SQUARE INCH GAUGE (PSIG) MAXIMUM LBS |
| flange_inside_width | 0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM FIRST FLANGE IN |
| NSN | 5985-00-565-2477 |
| TUBING WALL CONSTRUCTION STYLE | SEAMLESS SINGLE TUBING SEGMENT |
| FLANGE INSIDE HEIGHT | 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM FIRST FLANGE IN |
| FLANGE INSIDE HEIGHT | 0.503 INCHES MINIMUM AND 0.506 INCHES MAXIMUM SECOND FLANGE IN |
| FLANGE QUANTITY | 2 |
| VOLTAGE STANDING WAVE RATIO | 1.00 |
| BEND ANGLE IN DEG | 90.0 FIRST BEND E-PLANE |
| BEND ANGLE IN DEG | 90.0 FOURTH BEND H-PLANE |
| BEND ANGLE IN DEG | 90.0 SECOND BEND E-PLANE |
| BEND ANGLE IN DEG | 90.0 THIRD BEND H-PLANE |
| BEND ANGLE IN DEG | 90.0 FIFTH BEND H-PLANE |
No substitute or cross-reference records for this part.