PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2835-2
2835-2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: PLASTIC BODYPLASTIC BODY, body_style: TV TUBE MOUNTTV TUBE MOUNT, body_width: 0.935 INCHES MINIMUM AND 0.935 INCHES MINIMUM AND 0.945 INCHES MAXIMUM0.945 INCHES MAXIMUM IN, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-106-8124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2835-2
NSN: 5305-00-106-8124
FSC: 5305
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialPLASTIC BODYPLASTIC BODY
body_styleTV TUBE MOUNTTV TUBE MOUNT
body_width0.935 INCHES MINIMUM AND 0.935 INCHES MINIMUM AND 0.945 INCHES MAXIMUM0.945 INCHES MAXIMUM IN
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MAXIMUM IN
inclosure_typeENCASED
overall_height0.833 INCHES MAXIMUM0.833 INCHES MAXIMUM IN
overall_length0.300 INCHES NOMINAL IN
fastener_length1.000 INCHES NOMINAL IN
hardness_rating80.0 ROCKWELL C MINIMUM OVERALL
NSN5305-00-106-8124
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2835-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 20
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OESTED FIELD
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.428 INCHES NOMINAL IN
•
THREAD LENGTH: 0.781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH20
MATERIALSTEEL CORROSION RESISTING OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OESTED FIELD
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES NOMINAL IN
THREAD LENGTH0.781 INCHES NOMINAL IN
FASTENER LENGTH0.968 INCHES NOMINAL IN
HEAD HEIGHT0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1/4-20 X 1 HEXInterchangeable
interchangeable cross-reference
interchangeable
207-1161P8Interchangeable
interchangeable cross-reference
interchangeable
SPP60-0157Interchangeable
interchangeable cross-reference
interchangeable
283-5-2Interchangeable
interchangeable cross-reference
interchangeable
1626830P1Interchangeable
interchangeable cross-reference
interchangeable
28.352Interchangeable
Drill Set,pivot,jeweler's
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2835-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2835-2?
2835-2 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace 2835-2?
There are 9 known substitutes for 2835-2: 1/4-20 X 1 HEX, 207-1161P8, SPP60-0157 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2835-2?
2835-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-106-8124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2835-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026