PartsTable
Technical Data Sheet
PartsTable / O-RING / 283486-0001 PIECE 60
283486-0001 PIECE 60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, peripheral_diameter: 1.137 INCHES NOMINAL IN, center_hole_diameter: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-222-3508, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
283486-0001 PIECE 60
NSN: 5331-01-222-3508
FSC: 5331 — O-RING
CAGE: 99657 — MAROTTA CONTROLS INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
peripheral_diameter1.137 INCHES NOMINAL IN
center_hole_diameter0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationZZZW
NSN5331-01-222-3508
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 283486-0001 PIECE 60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
PERIPHERAL DIAMETER: 1.137 INCHES NOMINAL IN
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
•
CENTER HOLE DIAMETER: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZW
PERIPHERAL DIAMETER1.137 INCHES NOMINAL IN
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
CENTER HOLE DIAMETER0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
D84232 PIECE 53Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-212Interchangeable
interchangeable cross-reference
interchangeable
2-212-V884-75Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83248/1Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-83248/1-012Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248/1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 283486-0001 PIECE 60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 283486-0001 PIECE 60?
283486-0001 PIECE 60 is a O-RING.
What parts can replace 283486-0001 PIECE 60?
There are 19 known substitutes for 283486-0001 PIECE 60: D84232 PIECE 53, M83248/1-212, 2-212-V884-75 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 283486-0001 PIECE 60?
283486-0001 PIECE 60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-222-3508. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 283486-0001 PIECE 60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026