PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2832041
2832041 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, action_type: GRAVITY, overall_length: 0.230 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM IN, overall_diameter: 0.090 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-929-6232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2832041
NSN: 5340-00-929-6232
FSC: 5340
CAGE: 62323 — CONAX FLORIDA CORPORATION (USA)
SPECIFICATIONS
materialGLASS ENCLOSURE
action_typeGRAVITY
overall_length0.230 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM IN
overall_diameter0.090 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
special_featuresHOLE DIAMETER:0.190 IN.;HOLE SPACING:0.750 IN.APART IN
features_providedHERMETICALLY SEALED CASE
mounting_hole_quantity2
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/279 GOVERNMENT SPECIFICATION
current_rating_per_characteristic250.00 MILLIAMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
NSN5340-00-929-6232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2832041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
ACTION TYPE: GRAVITY
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESHOLE DIAMETER:0.190 IN.;HOLE SPACING:0.750 IN.APART IN
MOUNTING HOLE QUANTITY2
ACTION TYPEGRAVITY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
28473-41214Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-19500/279Interchangeable
interchangeable cross-reference
interchangeable
MR250-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2832041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2832041?
2832041 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 2832041?
There are 3 known substitutes for 2832041: 28473-41214, MIL-PRF-19500/279, MR250-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 2832041?
2832041 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-929-6232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2832041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026