PartsTable
Technical Data Sheet
PartsTable / MRO / 2831155-1

2831155-1 — Cable Assembly Specs

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 2831155-1 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, overall_width: 10.430 INCHES NOMINAL IN, overall_length: 18.930 INCHES NOMINAL IN, bolt_hole_quantity: 26, environmental_protection_material_location: THROUGHOUT SEALING GASKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-514-2132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2831155-1
NSN: 5999-00-514-2132
FSC: 5999
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_diameter0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
overall_width10.430 INCHES NOMINAL IN
overall_length18.930 INCHES NOMINAL IN
bolt_hole_quantity26
environmental_protection_material_locationTHROUGHOUT SEALING GASKET
outside_edge_to_bolt_hole_center_distance_along_width0.340 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.340 INCHES NOMINAL IN
NSN5999-00-514-2132
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 2831155-1 MFR 2831155-1
KEY FEATURES
•
MATERIAL: UNABLE TO DECODE
•
HOLE DIAMETER: 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT SEALING GASKET
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.340 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.340 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 26
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH18.930 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
HOLE DIAMETER0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT SEALING GASKET
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.340 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.340 INCHES NOMINAL IN
BOLT HOLE QUANTITY26
MATERIALUNABLE TO DECODE
OVERALL WIDTH10.430 INCHES NOMINAL IN
OVERALL LENGTH18.930 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
07-0601Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMATSourcing: other
Ready to buy 2831155-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2831155-1?
2831155-1 is a 2831155-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2831155-1?
There is 1 known substitute for 2831155-1: 07-0601. Substitute compatibility should be verified for your specific system.
What is the NSN for 2831155-1?
2831155-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-514-2132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2831155-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026