PartsTable
Technical Data Sheet
Download PDF

283.002-040 — HOOK,SUPPORT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

283.002-040: HOOK,SUPPORT.

The HOOK,SUPPORT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, material_width: 0.380 INCHES NOMINAL IN, overall_height: 1.120 INCHES NOMINAL IN, surface_treatment: PASSIVATE, material_thickness: 0.160 INCHES NOMINAL IN, mounting_hole_diameter: 0.098 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-735-4890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
283.002-040
NSN: 5340-00-735-4890
FSC: 5340 — Hardware, Commercial
CAGE: C6359 — MICCAVIONICS GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
material_width0.380 INCHES NOMINAL IN
overall_height1.120 INCHES NOMINAL IN
surface_treatmentPASSIVATE
material_thickness0.160 INCHES NOMINAL IN
mounting_hole_diameter0.098 INCHES NOMINAL IN
mounting_hole_quantity2
specification/standard_data80205-NAS622 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
overall_length_from_mounting_surface0.380 INCHES NOMINAL IN
NSN5340-00-735-4890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 283.002-040 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.160 INCHES NOMINAL IN
•
MATERIAL WIDTH: 0.380 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS622 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
OVERALL LENGTH FROM MOUNTING SURFACE: 0.380 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT1.120 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
MATERIAL THICKNESS0.160 INCHES NOMINAL IN
MATERIAL WIDTH0.380 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS622 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OVERALL LENGTH FROM MOUNTING SURFACE0.380 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 2
NAS622Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
6846097-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 283.002-040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 283.002-040?
283.002-040 is a HOOK,SUPPORT.
What parts can replace 283.002-040?
There are 2 known substitutes for 283.002-040: NAS622, 6846097-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 283.002-040?
283.002-040 is cataloged in the U.S. Government catalog under NSN 5340-00-735-4890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 283.002-040

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.