The Jacking Tool,shaft, cataloged under National Stock Number 2825-01-058-1757, is classified within Federal Supply Class 2825 (Steam Turbines and Components) of the Engines, Turbines, and Components group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2825-01-058-1757 |
| Item Name | Jacking Tool,shaft |
| FSC / FSG | 2825 / 28 — Steam Turbines and Components |
| Status | ACTIVE |
| General Characteristics Item Description | JACK STRAP 20.000 IN. WIDE AND 6.500 IN. HIGH 1;YOKE HAS TWO HOLES 2.00 IN. DEEP AND 0.750-10 TAPER;1.500 IN. THICK 1;SHIM 2.500 IN. LONG AND 1.500 IN. THICK WITH TWO HOLES 1.260 IN. CENTER TO CENTER,0.312 IN. DIA THRU COUNTERSINK 0.180 DEEP 2;HEX BOLT 2;MACHINE SCREW 4;SHIM .06X1.76X12.76 IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 727C452-1 | 5/9 Secondary reference Siemens Government Technologies, Inc. Dba Sgt Dresser-Rand Div Sgt Dresser-Rand |
| 727C452-1 | 5/9 Secondary reference General Electric Company |
| 727C452-1 | 3/9 Design control — primary reference General Electric Co Naval and Drive Turbine Systems Dept |
| 727C452-1 | C/1 Advisory reference — outside the item-of-supply concept Curtiss-Wright Electro-Mechanical Corp Dba Steam & Air Solutions Div Curtiss-Wright Steam and Air Solutions |
| 727C452-001 | 5/9 Secondary reference General Electric Company |
| 727C452 | D/9 Drawing number reference only General Electric Company |
NSN 2825-01-058-1757 is a Jacking Tool,shaft, classified under FSC 2825, Steam Turbines and Components. Status: active.
Key specifications for 2825-01-058-1757: General Characteristics Item Description: JACK STRAP 20.000 IN. WIDE AND 6.500 IN. HIGH 1;YOKE HAS TWO HOLES 2.00 IN. DEEP AND 0.750-10 TAPER;1.500 IN. THICK 1;SHIM 2.500 IN. LONG AND 1.500 IN. THICK WITH TWO HOLES 1.260 IN. CENTER TO CENTER,0.312 IN. DIA THRU COUNTERSINK 0.180 DEEP 2;HEX BOLT 2;MACHINE SCREW 4;SHIM .06X1.76X12.76 IN. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.