PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 28215
28215 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 431 OVERALL, body_width: 3.000 INCHES NOMINAL IN, body_height: 2.750 INCHES NOMINAL IN, body_length: 3.250 INCHES NOMINAL IN, hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-213-1505, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
28215
NSN: 5330-00-213-1505
FSC: 5330
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 431 OVERALL
body_width3.000 INCHES NOMINAL IN
body_height2.750 INCHES NOMINAL IN
body_length3.250 INCHES NOMINAL IN
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
inclosure_typeFULLY INCLOSED
connection_typeTHREADED EXTERNAL PIPE ALL ENDS
flange_diameter0.350 INCHES MINIMUM AND 0.352 INCHES MAXIMUM IN
hardness_rating42.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL
mounting_methodTERMINAL SINGLE GROUP
connection_stylePLAIN (PIPE) ALL ENDS
frequency_rating60.0 HERTZ NOMINAL SINGLE COMPONENT
NSN5330-00-213-1505
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 28215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
MATERIALPAPER OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
28215Interchangeable
interchangeable cross-reference
interchangeable
5LAY-03Interchangeable
interchangeable cross-reference
interchangeable
JD-2557Interchangeable
interchangeable cross-reference
interchangeable
T1-3803-1286399PC46Interchangeable
interchangeable cross-reference
interchangeable
5901-1383560ITEM86Interchangeable
interchangeable cross-reference
interchangeable
55400-5900-871186PC14D282-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 28215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 28215?
28215 is a ADAPTER,STRAIGHT,PIPE TO TUBE.
What parts can replace 28215?
There are 10 known substitutes for 28215: 28215, 5LAY-03, JD-2557 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 28215?
28215 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-213-1505. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 28215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026