PartsTable
Technical Data Sheet
PartsTable / MRO / 28182
28182 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL, body_length: 1.250 INCHES NOMINAL IN, corner_shape: SQUARE ALL CORNERS, body_diameter: 0.750 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-382-8768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 28182
NSN: 5340-00-382-8768
FSC: 5340
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL
body_length1.250 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
body_diameter0.750 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
overall_length0.3000 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM IN
surface_finish100.0 MICROINCHES OVERALL
hardness_rating36.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL
terminal_length0.375 INCHES NOMINAL IN
performance_typeHEAVY DUTY
special_featuresSTEEL WIRE BENT IN U SHAPE WITH RETAINING NUT AND RETAINER CUP; FOR 2.000 IN. DIA SEDIMENT BOWL IN
NSN5340-00-382-8768
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 28182 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTEEL WIRE BENT IN U SHAPE WITH RETAINING NUT AND RETAINER CUP; FOR 2.000 IN. DIA SEDIMENT BOWL IN
END ITEM IDENTIFICATION3825-00-859-7926
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
54380Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
1098BInterchangeable
interchangeable cross-reference
interchangeable
ABS25Interchangeable
interchangeable cross-reference
interchangeable
4AB25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 28182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 28182?
28182 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 28182?
There are 23 known substitutes for 28182: QQ-A-200/8, 54380, AMS-QQ-A-200/8 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 28182?
28182 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-382-8768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 28182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026