2815950-1: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN, diameter: 0.2480 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM IN, material: STEEL COMP 431 OVERALL, head_style: FLAT, chamfer_length: 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER. This part is cataloged in the U.S.
Government catalog under NSN 5315-00-989-2778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN |
| diameter | 0.2480 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM IN |
| material | STEEL COMP 431 OVERALL |
| head_style | FLAT |
| chamfer_length | 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| surface_finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| style_designator | STRAIGHT |
| pin_chamfer_angle | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| pin_head_diameter | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| under_head_length | 1.363 INCHES MINIMUM AND 1.393 INCHES MAXIMUM IN |
| first_hole_diameter | 0.071 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| hole_arrangement_style | ONE END DRILLED |
| NSN | 5315-00-989-2778 |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| CHAMFER LENGTH | 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 1.363 INCHES MINIMUM AND 1.393 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST HOLE DIAMETER | 0.071 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.2480 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.