PartsTable
Technical Data Sheet
PartsTable / MRO / 2813-5
2813-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include length: 38.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, design_type: SOLID, ridge_height: 0.0620 INCHES NOMINAL IN, bore_diameter: 0.5600 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-306-1332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2813-5
NSN: 4820-00-306-1332
FSC: 4820
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
length38.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
design_typeSOLID
ridge_height0.0620 INCHES NOMINAL IN
bore_diameter0.5600 INCHES NOMINAL IN
coil_quantity13 1/2
hole_diameter0.500 INCHES NOMINAL IN
hole_quantity5
overall_height0.3750 INCHES NOMINAL IN
shank_diameter2.500 INCHES NOMINAL IN
inside_diameter0.124 INCHES NOMINAL IN
NSN4820-00-306-1332
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 2813-5 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 8.688 INCHES NOMINAL IN
•
SHANK DIAMETER: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPECIAL SHAPED
•
BOLT HOLE QUANTITY: 6
•
BOLT CIRCLE DIAMETER: 7.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER8.688 INCHES NOMINAL IN
SHANK DIAMETER2.500 INCHES NOMINAL IN
STYLE DESIGNATORSPECIAL SHAPED
BOLT HOLE QUANTITY6
OVERALL HEIGHT1.625 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER7.750 INCHES NOMINAL IN
HOLE DIAMETER0.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2813-5Interchangeable
interchangeable cross-reference
interchangeable
7343272Interchangeable
interchangeable cross-reference
interchangeable
27003Interchangeable
interchangeable cross-reference
interchangeable
5360011886693Interchangeable
interchangeable cross-reference
interchangeable
0281350001Interchangeable
interchangeable cross-reference
interchangeable
281.350Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2813-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2813-5?
2813-5 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2813-5?
There are 8 known substitutes for 2813-5: 2813-5, 7343272, 27003 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2813-5?
2813-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-306-1332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2813-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026