PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2810H13-008
2810H13-008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.925 INCHES MINIMUM AND 4.945 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 3.271 INCHES MINIMUM AND 3.291 INCHES MAXIMUM IN, bolt_circle_diameter: 4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-2761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2810H13-008
NSN: 5330-00-118-2761
FSC: 5330
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.925 INCHES MINIMUM AND 4.945 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter3.271 INCHES MINIMUM AND 3.291 INCHES MAXIMUM IN
bolt_hole_quantity4
bolt_circle_diameter4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN
outside_corner_radius0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM IN
material_document_and_classificationAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-118-2761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2810H13-008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 3.271 INCHES MINIMUM AND 3.291 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SIDE RADIUS FROM GASKET CENTER1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM IN
APERTURE DIAMETER3.271 INCHES MINIMUM AND 3.291 INCHES MAXIMUM IN
OVERALL WIDTH4.925 INCHES MINIMUM AND 4.945 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
BOLT HOLE QUANTITY4
HOLE DIAMETER0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
0346650Interchangeable
interchangeable cross-reference
interchangeable
851374Interchangeable
interchangeable cross-reference
interchangeable
5637Interchangeable
interchangeable cross-reference
interchangeable
DMS 77030BInterchangeable
interchangeable cross-reference
interchangeable
1946-1008P3Interchangeable
interchangeable cross-reference
interchangeable
177943Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2810H13-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2810H13-008?
2810H13-008 is a GASKET.
What parts can replace 2810H13-008?
There are 12 known substitutes for 2810H13-008: 0346650, 851374, 5637 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2810H13-008?
2810H13-008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-2761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2810H13-008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026