PartsTable
Technical Data Sheet
Download PDF

2808019-1 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2808019-1: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: STEEL COMP 304 OR STEEL COMP 303.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-057-6674, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2808019-1
NSN: 5305-01-057-6674
FSC: 5305 — Screws
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialSTEEL COMP 304 OR STEEL COMP 303
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch64
NSN5305-01-057-6674
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2808019-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 303
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
THREAD LENGTH0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 304 OR STEEL COMP 303
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
13966-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2808019-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2808019-1?
2808019-1 is a SCREW,MACHINE.
What parts can replace 2808019-1?
There is 1 known substitute for 2808019-1: 13966-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 2808019-1?
2808019-1 is cataloged in the U.S. Government catalog under NSN 5305-01-057-6674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2808019-1