PartsTable
Technical Data Sheet
Download PDF

2806703-1 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2806703-1: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL, overall_length: 4.811 INCHES MINIMUM AND 4.871 INCHES MAXIMUM IN, handle_clearance: 1.189 INCHES MINIMUM AND 1.249 INCHES MAXIMUM IN, special_features: OVAL SHAPE MATERIAL, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-372-8753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2806703-1
NSN: 5340-00-372-8753
FSC: 5340 — Hardware, Commercial
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL
overall_length4.811 INCHES MINIMUM AND 4.871 INCHES MAXIMUM IN
handle_clearance1.189 INCHES MINIMUM AND 1.249 INCHES MAXIMUM IN
special_featuresOVAL SHAPE MATERIAL
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8,T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.530 INCHES MINIMUM AND 4.590 INCHES MAXIMUM IN
NSN5340-00-372-8753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2806703-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.530 INCHES MINIMUM AND 4.590 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8,T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.189 INCHES MINIMUM AND 1.249 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.530 INCHES MINIMUM AND 4.590 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8,T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.811 INCHES MINIMUM AND 4.871 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.189 INCHES MINIMUM AND 1.249 INCHES MAXIMUM IN
SPECIAL FEATURESOVAL SHAPE MATERIAL
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
10940-A-1032-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
2132123-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
0BA14Reference document
Same NSN cross-reference
Reference document — Secondary reference
FV470-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2806703-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2806703-1?
2806703-1 is a HANDLE,BOW.
What parts can replace 2806703-1?
There are 4 known substitutes for 2806703-1: 10940-A-1032-2, 2132123-1, 0BA14 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2806703-1?
2806703-1 is cataloged in the U.S. Government catalog under NSN 5340-00-372-8753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2806703-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.