280433F1X — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

280433F1X: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN, shaft_length: 0.432 INCHES MINIMUM AND 0.447 INCHES MAXIMUM SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, pole_quantity: 2 SINGLE SECTION REAR, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-01-059-5748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 280433F1X

NSN: 5930-01-059-5748
FSC: 5930 — Switches
CAGE: 76854 — ELECTRO SWITCH CORP. DBA OAK GRISGSBY DIV ELECTROSWITCH (USA)

SPECIFICATIONS

shaft_type	ROUND, FLATTED SINGLE ACTUATOR
flat_height	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN
shaft_length	0.432 INCHES MINIMUM AND 0.447 INCHES MAXIMUM SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
pole_quantity	2 SINGLE SECTION REAR
terminal_type	TAB, SOLDER LUG
thread_length	0.365 INCHES MINIMUM AND 0.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
overall_length	1.912 INCHES NOMINAL IN
shaft_diameter	0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity	3 SINGLE SECTION REAR
mounting_method	THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY
overall_diameter	1.380 INCHES MAXIMUM IN
NSN	5930-01-059-5748

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

TERMINAL TYPE: TAB, SOLDER LUG

•

OVERALL DIAMETER: 1.380 INCHES MAXIMUM IN

•

FIRST FLAT LENGTH: 0.312 INCHES NOMINAL SINGLE ACTUATOR IN

•

PRECIOUS MATERIAL: SILVER

•

CONTACT LOAD CURRENT RATING: 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND, FLATTED SINGLE ACTUATOR
SHAFT DIAMETER	0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
TERMINAL TYPE	TAB, SOLDER LUG
OVERALL DIAMETER	1.380 INCHES MAXIMUM IN
FIRST FLAT LENGTH	0.312 INCHES NOMINAL SINGLE ACTUATOR IN
PRECIOUS MATERIAL	SILVER
CONTACT LOAD CURRENT RATING	2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
MOUNTING METHOD	THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY

OTHER ITEMS IN FSC 5930 — Switches

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5930-00-000-0117 5930-00-001-1407 5930-00-001-1890 5930-00-001-2571 5930-00-001-2575 5930-00-001-2580 5930-00-001-2608 5930-00-001-2609

SUBSTITUTES & CROSS-REFERENCES 1

2903104-43Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 280433F1X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 280433F1X?

280433F1X is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 280433F1X?

There is 1 known substitute for 280433F1X: 2903104-43. Substitute compatibility should be verified for your specific system.

What is the NSN for 280433F1X?

280433F1X is cataloged in the U.S. Government catalog under NSN 5930-01-059-5748. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

280433F1X — SWITCH,ROTARY

Request a Quote — 280433F1X