PartsTable
Technical Data Sheet
Download PDF

27D1013 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

27D1013: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include hole_diameter: 0.156 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 19.000 INCHES NOMINAL IN, overall_diameter: 0.375 INCHES NOMINAL IN, surface_treatment: ENAMEL OVERALL, drilled_hole_location: BOTH ENDS, distance_from_end_to_hole_center: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-301-7755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
27D1013
NSN: 5340-00-301-7755
FSC: 5340 — Hardware, Commercial
CAGE: 44950 — ONEIDA LTD SILVERSMITHS (USA)
SPECIFICATIONS
hole_diameter0.156 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
overall_length19.000 INCHES NOMINAL IN
overall_diameter0.375 INCHES NOMINAL IN
surface_treatmentENAMEL OVERALL
drilled_hole_locationBOTH ENDS
distance_from_end_to_hole_center0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5340-00-301-7755
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 27D1013 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
SURFACE TREATMENT: ENAMEL OVERALL
•
HOLE DIAMETER: 0.156 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
DISTANCE FROM END TO HOLE CENTER: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.375 INCHES NOMINAL IN
DRILLED HOLE LOCATIONBOTH ENDS
OVERALL LENGTH19.000 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL OVERALL
HOLE DIAMETER0.156 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
DISTANCE FROM END TO HOLE CENTER0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 5
2291158Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
412E17Reference document
Same NSN cross-reference
Reference document — Secondary reference
956164Reference document
Same NSN cross-reference
Reference document — Secondary reference
1-33-267Reference document
Same NSN cross-reference
Reference document — Secondary reference
27A2455Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 27D1013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27D1013?
27D1013 is a ROD,STRAIGHT,HEADLESS.
What parts can replace 27D1013?
There are 5 known substitutes for 27D1013: 2291158, 412E17, 956164 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27D1013?
27D1013 is cataloged in the U.S. Government catalog under NSN 5340-00-301-7755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27D1013

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.