PartsTable
Technical Data Sheet
Download PDF

2795563-1 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2795563-1: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.125 INCHES NOMINAL IN, shaft_style: ROUND, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.313 INCHES NOMINAL IN, shaft_runout: 0.001 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-130-2512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2795563-1
NSN: 5905-01-130-2512
FSC: 5905 — Resistor
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.125 INCHES NOMINAL IN
shaft_styleROUND
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.313 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter0.500 INCHES NOMINAL IN
pilot_diameter0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
shaft_diameter0.093 INCHES NOMINAL IN
shaft_end_play0.00300 INCHES IN
undercut_width0.0620 INCHES NOMINAL IN
NSN5905-01-130-2512
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 2795563-1 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
BODY DIAMETER: 0.500 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0620 INCHES NOMINAL IN
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.093 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
BODY STYLE: CYLINDRICAL SERVO MOUNTED
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.500 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
UNDERCUT WIDTH0.0620 INCHES NOMINAL IN
SECTION QUANTITY1
SHAFT DIAMETER0.093 INCHES NOMINAL IN
UNDERCUT DIAMETER0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL SERVO MOUNTED
SHAFT END PLAY0.00300 INCHES IN
CONTACT ARM ELECTRICAL OFF POSITIONFULLY CCW
SUBSTITUTES & CROSS-REFERENCES 2
10127425Reference document
Same NSN cross-reference
Reference document — Informative reference only
3750S-481-103Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2795563-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2795563-1?
2795563-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2795563-1?
There are 2 known substitutes for 2795563-1: 10127425, 3750S-481-103. Substitute compatibility should be verified for your specific system.
What is the NSN for 2795563-1?
2795563-1 is cataloged in the U.S. Government catalog under NSN 5905-01-130-2512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2795563-1