PartsTable
Technical Data Sheet
Download PDF

27881-27820CLASS3 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

27881-27820CLASS3: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.7288 INCHES NOMINAL IN, cone_width: 0.9330 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES MINIMUM AND 1.5005 INCHES MAXIMUM IN, overall_width: 0.9688 INCHES NOMINAL IN, standout_width: 0.2400 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-932-3792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
27881-27820CLASS3
NSN: 3110-00-932-3792
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.7288 INCHES NOMINAL IN
cone_width0.9330 INCHES NOMINAL IN
bore_diameter1.5000 INCHES MINIMUM AND 1.5005 INCHES MAXIMUM IN
overall_width0.9688 INCHES NOMINAL IN
standout_width0.2400 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
lubrication_materialLUBRICANT
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter3.1510 INCHES MINIMUM AND 3.1520 INCHES MAXIMUM IN
retainer_fabrication_methodSTAMPED
NSN3110-00-932-3792
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 27881-27820CLASS3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
LUBRICATION MATERIAL: LUBRICANT
•
CUP WIDTH: 0.7288 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 3.1510 INCHES MINIMUM AND 3.1520 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODSTAMPED
LUBRICATION MATERIALLUBRICANT
CUP WIDTH0.7288 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.9688 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.1510 INCHES MINIMUM AND 3.1520 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.2400 INCHES NOMINAL IN
CONE WIDTH0.9330 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
2523766Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 27881-27820CLASS3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27881-27820CLASS3?
27881-27820CLASS3 is a BEARING,ROLLER,TAPERED.
What parts can replace 27881-27820CLASS3?
There is 1 known substitute for 27881-27820CLASS3: 2523766. Substitute compatibility should be verified for your specific system.
What is the NSN for 27881-27820CLASS3?
27881-27820CLASS3 is cataloged in the U.S. Government catalog under NSN 3110-00-932-3792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27881-27820CLASS3