PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2786-20
2786-20 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

SAW,CIRCULAR BLADE,METAL CUTTING. Key specifications include current_type: DC, drive_method: ELECTRIC MOTOR, maximum_cutting_depth: 3.4 INCHES IN, rotational_speed_rating_in_rpm: 6600.0, blade_maximum_diameter_accommodated: 9.0 INCHES IN, part_name_assigned_by_controlling_agency: 9 INCH CUT-OFF SAW IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-969-0390, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2786-20
NSN: 4720-00-969-0390
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
current_typeDC
drive_methodELECTRIC MOTOR
special_featuresINCLUDES 9 INCH CUT-OFF SAW, 1 DIAMOND PREMIUM SEGMENTED BLADE, 1 9 INCH X 3/32 INCH X 7/8 INCH METAL CUT-OFF WHEEL, 1 WRENCH, 1 HEX WRENCH, IN
maximum_cutting_depth3.4 INCHES IN
rotational_speed_rating_in_rpm6600.0
blade_maximum_diameter_accommodated9.0 INCHES IN
part_name_assigned_by_controlling_agency9 INCH CUT-OFF SAW IN
NSN4720-00-969-0390
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 2786-20 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND 4TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 18.000 INCHES IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND WEATHERPROOF
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND 4TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS18.000 INCHES IN
INSIDE SURFACE CONDITIONSMOOTH
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND WEATHERPROOF
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
HYDROSTATIC TEST PRESSURE6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
454951-2Interchangeable
interchangeable cross-reference
interchangeable
950026-20Interchangeable
interchangeable cross-reference
interchangeable
75-4Interchangeable
interchangeable cross-reference
interchangeable
75120Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-43940Interchangeable
interchangeable cross-reference
interchangeable
FC-280Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2786-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2786-20?
2786-20 is a SAW,CIRCULAR BLADE,METAL CUTTING.
What parts can replace 2786-20?
There are 10 known substitutes for 2786-20: 454951-2, 950026-20, 75-4 and 7 more. Substitute compatibility should be verified for your specific system.
Is 2786-20 still available?
2786-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2786-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026