PartsTable
Technical Data Sheet
PartsTable / MRO / 2786
2786 ✓ Verified by PartsTable
Middle Atlantic Products · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Drop Ceiling Connector Fitting in Ivory. Key specifications include material: STEEL OVERALL, unit_type: MANDREL, case_style: SQUARE, cone_width: 1.0100 INCHES NOMINAL IN, seal_width: 0.500 INCHES NOMINAL IN, body_length: 0.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2786
NSN: 3110-00-100-0742
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
unit_typeMANDREL
case_styleSQUARE
cone_width1.0100 INCHES NOMINAL IN
seal_width0.500 INCHES NOMINAL IN
body_length0.438 INCHES NOMINAL IN
body_diameter0.200 INCHES NOMINAL IN
bore_diameter1.3750 INCHES NOMINAL IN
terminal_typeTAB W/WIRE LEAD
inclosure_typeENCAPSULATED
terminal_width0.063 INCHES NOMINAL IN
terminal_length0.188 INCHES NOMINAL IN
NSN3110-00-100-0742
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2786 · Middle Atlantic Products ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.2031 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.0100 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER1.3750 INCHES NOMINAL IN
CONE CORNER RADIUS0.2031 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
106510Interchangeable
interchangeable cross-reference
interchangeable
10611Interchangeable
interchangeable cross-reference
interchangeable
77844Interchangeable
interchangeable cross-reference
interchangeable
94230Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
53X2786Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2786?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2786?
2786 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Middle Atlantic Products. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2786?
There are 22 known substitutes for 2786: 106510, 10611, 77844 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2786?
2786 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2786

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026