PartsTable
Technical Data Sheet
Download PDF

277-100C — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

277-100C: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, outside_diameter: 1.312 INCHES NOMINAL IN, aperture_diameter: 1.015 INCHES NOMINAL IN, surface_treatment: NICKEL OVERALL, gage_ring_thickness: 0.065 INCHES NOMINAL IN, bearing_surface_width: 0.1487 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-3581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
277-100C
NSN: 5330-00-582-3581
FSC: 5330 — Packing and Gasket Materials
CAGE: 94581 — V I J CORP DIV NATIONAL UTILITIES COMPANY (USA)
SPECIFICATIONS
materialCOPPER OVERALL
outside_diameter1.312 INCHES NOMINAL IN
aperture_diameter1.015 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
gage_ring_thickness0.065 INCHES NOMINAL IN
bearing_surface_width0.1487 INCHES NOMINAL IN
cross-sectional_thickness0.149 INCHES NOMINAL IN
gage_ring_outside_diameter1.710 INCHES NOMINAL IN
NSN5330-00-582-3581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 277-100C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.149 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.065 INCHES NOMINAL IN
•
BEARING SURFACE WIDTH: 0.1487 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.312 INCHES NOMINAL IN
•
GAGE RING OUTSIDE DIAMETER: 1.710 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.015 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.149 INCHES NOMINAL IN
GAGE RING THICKNESS0.065 INCHES NOMINAL IN
BEARING SURFACE WIDTH0.1487 INCHES NOMINAL IN
OUTSIDE DIAMETER1.312 INCHES NOMINAL IN
GAGE RING OUTSIDE DIAMETER1.710 INCHES NOMINAL IN
APERTURE DIAMETER1.015 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
17189-100CReference document
Same NSN cross-reference
Reference document — Secondary reference
362-537-9101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 277-100C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 277-100C?
277-100C is a GASKET.
What parts can replace 277-100C?
There are 2 known substitutes for 277-100C: 17189-100C, 362-537-9101. Substitute compatibility should be verified for your specific system.
What is the NSN for 277-100C?
277-100C is cataloged in the U.S. Government catalog under NSN 5330-00-582-3581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 277-100C